Review on 🛠️ HAMMERHEAD HCSD040-02 4V Lithium Rechargeable Screwdriver Kit with Patented Circuit Sensor Technology and 9-Piece Bit Set by Jasmin Rojas

Used for electronics repairs for years. It can be too strong if you don't hold it properly or use it on very small and fragile screw fasteners. The adapter for the smaller screw bits needed magnetic support and a larger hole to hold the bits in place. I used sugar for this. - LED lights help in tight spaces - There is a computer repair technique that can only be mastered with a straight drill. Loosening: Press firmly from above to avoid damaging the screw. Tighten: Press down with one finger and loosely grasp the top half of the handle. The other hand operates the rotary switch. The key is to hold it long enough to tighten the screw and gently enough to allow the handle to rotate in your hand as the screw is tightened. This prevents the screw from tearing out, even with thin screws. Although I would still recommend hand tightening thin bolts whenever possible. crApple screws are notorious for this. Even the proprietary bits designed specifically for these 5 tooth screws are undersized and will slip and strip the screws if too much force is applied. Literally not a single bit or screwdriver fitted properly! That's how badly they want you to buy another piece of junk equipment. They may be easy to use, but fixing them, for whatever reason, is a nightmare for both the wallet and the tech. (Like 100 tiny screws to take out the keyboard). This practice makes that nightmare a lot less pathetic.