Review on 🔊 Adjustable Swivel Tilt Speaker Wall Ceiling Mount Stand - Black Bracket with Retractable Telescopic Arm - Ideal for Home Surround Sound System Bookshelf Satellite Speakers - Pyle PSTNDC31 (Pair) by Charles Barney

Mine has a square top plate with two sets of holes (I used the smaller inner holes). He seems to be durable. (rated for speakers up to 75 pounds) and costs $25 per pair. It is not expensive. The mounting hardware was all chrome/nickel plated, not black. It's invisible in my application, so I can live with that; otherwise i would install a piece of black isolate fittings, use black marker or paint no hardware, to mount the stand on the wall or speaker; I wasn't expecting as both depend on your application (wall/ceiling material and thickness, speaker mounting points, etc.). There were no instructions, but assembly was easy. I wish it had a mounting plate template; I could have used a sheet of paper or cardboard to make it, but I managed. The bolts holding the swing arm to the mounting plate were loose and I didn't realize it until I assembled a pair, so I had to remove them, remove the speakers and tighten the nuts. Check yes first. The biggest downside, as mentioned by others, is that the inner tube is not securely attached. The fixing screw that keeps it upright does not prevent that the inner tube rotates and rattles slightly. A few coats of friction tape helped, but I can drill and use a small metal screw to keep it from turning and rattling over time. What actually needs to be included is some sort of grommet or gasket or small pilot hole in the outer tube below and a screw to secure it once it's in place. Good value for money but expect to tweak it a bit yourself. to secure it once it's in place. Good value for money but expect to tweak it a bit yourself. to secure it once it's in place. Good value for money but expect to tweak it a bit yourself.