Review on 🔩 Enhanced Performance SKF BR930502 Wheel Bearing and Hub Assembly by Sam Bell

Completely identical to OEM parts. Perfect fit for my 2003 Ram CTD 4X4. Includes ABS sensor and wiring harness. To replace the hub you will need a 1 11/16 or 44mm socket to remove the axle nut. The caliper and caliper come loose. To remove the hub, loosen the 4 screws holding the hub and leave about 1/3 inch. Then use the head and the short extension on the same screw. Start the truck and turn the steering wheel so that the socket/extension makes contact. Axle housing or frame (depending on the bolt you press). The pressure of turning the wheel should separate the hub from the housing and allow removal. Much easier than endless hammering. part of the plug and then press the open part with your thumb, pull out the strap.