Review on K59-L1275 by Mateusz Dbski ᠌

Pros below: Perfectly approached Stinol 102. I changed the thermostat myself. Two screwdrivers with a flat and a square slot, pliers. Remove the decorative trim on the refrigerator control panel. We turn off the screws, including those that hold the door bracket. Remove the door too. Loosen the thermostat nut with pliers. We remove the wires. Unscrew and remove the top cover on the refrigerator. Next, inside, unscrew the screw of the plastic lining that secures the thermostat limit switch. We take out the capillary tube of the thermostat by removing the casing of the lamp holder. I had to look a little for the screws securing the lamp holder casing in the refrigerator. One is under the plug, the other is hidden under the shiny tape. We install the new one on the panel and tighten the nut, lay the capillary tube as it lay and assemble everything. The refrigerator started working immediately, after a few hours the freeze / defrost mode was established. Its cons: In the description of the Thermostat, the length of the capillary tube is 2 m, although in reality it came to 1 m, which it should be. The plastic latch of the contact cover was broken in one place, which, however, does not affect.