Review on Hooke Road Fender Wrangler Unlimited by Noe Spooner

They look beautiful. instructions are well written. However, the top holes were extremely difficult, aligning the bottom holes was also very difficult. I mounted the outer fenders of the same brand. I managed to screw in a top screw and a bottom screw on each side. I have a feeling the angled bends weren't exactly what you want. And the bottom edges were hard to get around the brake lines. place the bet. very difficult to pull out. I screwed in the bottom screw first and then I was only able to line up the top 1 screw on each side. because I install outer wings. the same brand. The top of the liner has 2 threaded fasteners. You will need to pass a screw through the inner panel on the outer fenders. but there is no way to pull out the inner panel to get the second top screw. I got 1st and decided to screw the bottom part with a nut. for more security. Because it seems that m8 rivet. not what i like. overall i like the look. just knowing that a couple of screws are almost impossible to align. in my experience. If only I knew it would be almost impossible to pull out the inner line for a test fit after installation. I would cut about 1/8th around both inner liners and then adjust the creases as needed. In any case, I like them.