Header banner
Revain logoHome Page
Petar Atanasov-robi ᠌ photo
1 Level
257 Review
0 Karma

Review on πŸ•ΉοΈ Thermaltake Versa H17 Black Micro ATX Mini Tower Gaming Computer Case 2.0 Edition CA-1J1-00S1NN-A0 with Pre-Installed 120mm Rear Fan - Ultimate Gaming Case! by Petar Atanasov-robi ᠌

Revainrating 5 out of 5

The perfect purchase for me, exactly what I was looking for!

The case fully deserves the fee that was charged for it; nevertheless, if you have the ability to spend more money, you should focus your attention on more severe situations. There is a sense of frugality and straightforwardness here. The lack of a dust filter in the front is the most significant disadvantage, as is the inability to remove the front panel entirely due to the fact that the front ports are mounted directly on it, the absence of cuffs on the cable entries, the lack of a sled for the HDD (they are screwed directly onto the case, and it is not very clear how to put them on the top mounting holes - connectors protrude beyond the envelope), and the inclusion of only one fan. But, to reiterate, for 2022 standards of a contemporary, yet understated appearance and contemporary layout for a low-cost assembly, the case is great, particularly given that it does not include an HDD. A misconception regarding fasteners can be resolved by purchasing four washers or longer screws from the hardware store that is most convenient. Alternately, the current fasteners might be able to accommodate your SSD.

Pros
  • A low-cost, compact casing with a contemporary design that has a more traditional appearance. Rubber spacers for drives, dust filters on the bottom and top, a separate PSU and HDD bay, room for a 2.5" SATA SSD, space for cables on the right side and a cable tie mount, a quiet and efficient exhaust fan, and space for mounting additional components on the front and the top.
Cons
  • 1 USB 3.0 port on the front, no dust filter on the front, and non-standard mounting screws for the hard drive that cannot be inserted onto an SSD since the thread is too small. In general, the majority of SSDs cannot be normally mounted on the screws that are included in the kit. The screws that are designed for installation through rubber bushings do not fit the thread, and if the bushings are removed (they are not particularly needed for SSDs), the holes remain too large. In this case, you will need to place washers under the small screws that are included in the kit.