Review on 🔩 Culligan UB-1 Mounting Bracket Kit, Including Screws by Josh Garber

PROTECT THE LEAK, READ>>>> After preparing the pipe for mounting the VCh-360A filter, I attached the UB-1 bracket to the Cover and installed the fittings and fixed to the wall. Pressure test to close the valve on the lid, no leaks, everything works fine. Then, as I slowly turned on the water, the transparent body filled with water and then leaked. I tighten the case with a wrench, still leaking. Checked the O-ring several times, no problems. I found that the strut kept the clear body from rising to the bottom of the blue cap when tightened, causing the o-ring to not close. The bracket had to be sanded or sanded with 1/16" sandpaper to make the body flush with the blue cap assembly. When installing the UB-1, make sure it is flush with the bottom of the blue cap.