Review on ⚡️ ASHATA 500W Inverter Boost Converter Transformer Power for DC 12V/24V to AC 18V 0-220V-380V Inverter Boost Module Board, Ideal for Field Night Market Vendors and More by John Akins

500w inverter Overview The inverter has a suitable driver IC which switches on and off opposite sets of 2 IRF MOSFETs in parallel. The 2 halves of the main drive carry multiple secondary outputs. ONLY an analog meter that is HIGH FREQUENCY and must be used to select the terminals required for the voltage output. V0-V7 This board needs a drop of solder for the switch connections at the K+SW points and then plugs the switch into the red wire along with the fuse holder. A total of 5 solder joints are required for the added wires and bridge solder. The frequency meter, part of the digital counter, can read the frequency of 20 kHz at the inverter output terminals. If a DC output is required later, only fast recovery diodes should be used as half-wave or bridge rectifiers. Also, the AC output voltage at the open circuit terminals is much higher. Measure the terminals with a meter and download at the same time.