Review on 🖥️ GIGABYTE Z590 UD AC - ATX Motherboard with Triple M.2, PCIe 4.0, USB 3.2 Gen 2, Intel Wireless-AC, 2.5GbE LAN (LGA 1200, Intel Z590) by Jasmit Insha ᠌

If you are experiencing this issue or want to purchase this motherboard, then: a) Your video card must be modern, although judging by the reviews, 2060 did not start, but 1060 did, it is not clear on what basis it chooses what to work with. b) Or have a processor with an integrated graphics chip. c) Have a display port, because until you install the driver on the video HDMI will not work. If you have reached the BIOS, you need to go to the Boot tab, enable CSM and from the bottom in the PCI Device you will be able to change to the Legacy type, after that it will work with your video card. Keep in mind that if you want to sit through HDMI, you will not be able to enter the BIOS, the screen will light up only when Windows is loaded. It is not clear why gigabit did not change the BIOS settings in the new firmware. Maybe they'll fix it in the future. I hope it will be useful to someone, and perhaps save time and money. Because of this jamb, the assembly dragged on for almost 2 weeks, because there was no time to deal with this nonsense, because of this, such an assessment. PS: and do not forget that if you ate the BIOS, then most likely your settings will be lost and you will not be able to start, without the presence of those things that I wrote about above.