Review on 📺 101AV Full Motion TV Wall Mount Bracket: Tilt, Swivel, & Hold up to 33lb (15Kg) for 10"-24" LCD LED Plasma TVs - VESA 100mm x 100mm by Charles Salgado

This is a fairly well made product that is quite capable of holding a TV or monitor. The tilt angle is adjustable, which is very convenient. on 2x4 in your wall for mounting screws. Issues: During installation, you need a couple of people, one to hold the TV and the other to insert the bracket on the back of the TV into the bracket. Whatever genius decides you need 3 washers not held in place by anything when trying to fit the bracket on the back of the TV into the socket on your hand should find another job. I had to glue them in place to assemble the item. This left me with no way of removing the tape once the pieces were together. You must align the bracket in the arm to insert the screw through the mounting holes. I had to use an ice pick to smash through the strap holding the washers in place and then line up the holes to get the bolt through the holes in the bracket and arm. I've seen some mounting blocks where the bracket on the back of the TV just plugs into the outlet and locks into the receiver on your arm, no need to mess with hardware to mount the TV. Another issue is that the TV wobbles from side to side too easily, even when things are as tight as possible. In general this is fine, but there may be better solutions.