Review on 🚘 Beck Arnley 044-8003 Auto Trans Filter by Chad Blanchet

. After watching 2 good videos on how to install this part on an '03 Honda Odyssey it took over 4 hours to install. Here is my experience: 1. no need to remove the battery box2. Remove the plastic cover of the motor - 4 screws3. Remove the black air inlet hose 4. Remove the battery 5. Unplug the 2 wire retainers (not the wire connector) from the bracket attached to the top left corner of the battery compartment when looking at the compartment6. Disconnect the large gray cable connector (just above the transmit filter)7. Use a combination wrench with a 10 mm ratchet! Use a telescopic magnetic grab to loosen two bolts to prevent the bolt from falling8. Using an 8 inch adjustable wrench, remove and install the filter. 9. When screwing the filter in, I bent the bracket used to hold the filter with two screws to make it easier to screw the filter in.