Review on 💪 Wej PD58: Optimal Performance with Internally Threaded Diameter by Eric Mueller

Works well. Like many others who bought this particular model, I had them reinstall the MAX JAX in a new location. This Wej-it is the right size and length and is the same as the MAX JAX from the factory. So if you're buying MAX JAX anchors, these are the ones you need. Also, as mentioned before, you need to be very careful and pay attention during installation as they can twist or pull too far or not far enough. Wej really needs a better explanation and a real tweak tool to make it consistent. I made a tool a while ago to install this type of anchor that works great as all Wej-it sends is a long "sacrifice" bolt and a very vague layout that works, but needs to be improved. Just a warning to do some google/forum research on installation if you've never done this before. expensive and increases the effectiveness of socket assembly strength. Once you drop anchor, it's usually over and you won't be operated on again. There are two options, hammering it through the ground or drilling it out, but both tend to increase the diameter of the hole slightly, and the new anchor must fit freely in that hole in order to install it. Just be patient and careful with them.