Review on Fractal FBA_FD CA NODE 202 BK Design Node 202 by Achara Chamniprasart ᠌

The case requires careful planning with the selection of all the details, otherwise something may not fit in size. For example, memory with heatsinks can definitely cause problems. It is better to install a video card with a turbine, otherwise the hot air will have nowhere to go. As a result, I got the following configuration: - Seasonic focus gold sgx 650 power supply - Core i9 9900 processor (namely 9900, which has a TDP of 65) - mat. Gigabyte Z390 I AORUS PRO WIFI board - Samsung memory 2 x 32Gb DDR4 2666MHz - cooler ID Cooling IS-60 (fan replaced with Noctua NF-A12x15 FLX) - MSI 2080 Aero graphics card - two Noctua NF-A12x15 FLX fans for blowing the video card - well, a pair of M.2 SSDs + a pair of 2.5-inch SSDs Be sure to remove both covers when assembling! Without this, it will not be possible to remove the emphasis for the video card. Do not install the cooler on the motherboard in advance! First, the motherboard is installed, then the PCI-Express riser, and only then the cooler (otherwise the riser cannot be screwed to the case). In order for the case to close, I had to remove the dust filter from the cooler window and - not only that - bite all the plastic protruding parts from this window around the inside. Otherwise, the lid would not close. If this window were made larger and provided with a magnetic filter, there would be no problem.