Review on 🪟 Achim Home Furnishings 37x72 White Tear Down Light Filtering Window Shade - Cords Free - Easy Installation by Jana Bramlage

Easy to install, easy to set up, highly recommended. Instructions are not included. Below is how I recorded how I finished installing purchased curtains. Necessary tools: pliers, scissors, screwdriver (manual or battery operated). Window frame (your preference), now again measure the required length to ensure a secure fit. Use pliers to remove the white side with the cap, unfold the entire curtain, measure the rod again to check for flaws. Now starting at the bottom with scissors, cut the curtain to the desired width until you get to the stem, this is where you separate the rest from the cardboard. Here you can remove all the necessary cardboard rings from the pole. Then roll up the curtain completely and evenly. Once that's done, it's time to replace the white cap (don't forget to line up the grooves). While holding the rolled up cornice, place the white portion of the cap on the ground and press until the protruding metal is no longer visible. Next you need to make sure that the curtain will fit the brackets already installed. When this is done and your curtain is installed and hung, measure the length required for the bottom plastic piece to insert into the bottom slot of your curtain. After that, congratulations, you're done! Enjoy using a customized blind.