Review on 🔒 Armored Cable Lock - ONGUARD Rottweiler by Brian Rogers

OnGuard 1" x 48" Cable Lock This item is advertised as 25mm (0.984252") as well as 30mm (1.1811"). Neither the one nor the other is true. The diameter of the vinyl sleeve is actually 0.961 inches, or just under 1 inch. The cable itself is slightly smaller but cannot be measured as the vinyl is translucent. It's 49 inches long, weighs 4 pounds, and the vinyl-coated steel cable is durable. The tamper evident locking head rotates easily for easy locking. The set contains five brass keys. To lock, lock the two ends, turn the key and remove. Lasts less than two seconds. Turn and release the key to unlock. Lasts about a second. This lock is designed so that the key is not removable when open - presumably to avoid losing the key (however if you press where the crossbar is inserted you will hear a click and the key can be released) . unlike some other cables which behave like a spiral spring. The cable is flexible and easy to maneuver around the job site. The cutting head of an acetylene torch can cut through any cable or chain, but who carries one around? On top of that, this thing boasts impressive physical security. OnGuard recommends regularly applying a liberal coat of WD40 to the locking mechanism to keep it running smoothly. The main disadvantage of this cable lock is the use of hardened steel for the steel bushings, cable ends and parts of the lock's internal mechanism, as these parts can rust over time - especially in humid climates. With a product intended for outdoor use, it is unforgivable that these parts are not made of stainless steel. High quality stainless steel like Type 316 is very hard, saw resistant and almost 100% rust free. Two stars deducted for this design flaw.