Review on MasterBox Q300L Micro-ATX Tower with Magnetic Dust Filter, Acrylic Side Panel, Adjustable I/O & Ventilated Airflow, in Black by Mateusz Sztrekier ᠌

It is difficult to describe the advantages of a budget building, but let's try. + Perforation of thin (more on this below) metal on the edges allows you to blow through the case very well. And there is no extraneous noise from the stream. + It is possible to place two 140mm coolers on the front and top panels. If you take normal blades with PWM PST support and connect the chain to the motherboard, then silence is guaranteed. And blowing the system will be redundant. + The case is so simple that the aesthetic elements are also dust screens. Which on magnetic tapes are kept on the edges. Simple and beautiful. + The insides are thought out well for a budget employee. Perhaps the location of two HDD or three SSD. If we talk about SSD, then the location is as follows: two in the cable channel, one on the plane of the motherboard. But with the HDD, not everything is so simple. You can hang one near the motherboard, but it is not recommended because of the thin metal and possible vibration. The only correct location of one HDD (3.5) in the cable channel. On one side, the HDD is reinforced with a special bracket, and on the other side, a metal case cover fits snugly - which is also a heat sink for heat dissipation. + It is possible to install any power supply - there is plenty of space. + A long 1070ti graphics card with three screws will easily fit. +The arcric freexer 33 cpu tower cooler fits comfortably. + The block of control buttons with two usb 3.0 can be moved along the edges of the sidewalls. Both on the right and on the left side. Covers are interchangeable. + The body can be positioned horizontally. There are side legs. I'm sure Cooler Master engineers wanted to use it horizontally. Since from the bottom there is quite a bit of space for air intake under the power supply. If you change the cover in some places and put the body on the horizon, then the body is given a certain "rigidity" and all vibrations are damped. An ingenious solution for such a flimsy case. + Ability to hang the radiator on the front face. + The price is attractive. I took for 2650 at the peak of sales on 112022.