Review on Emliviar 4054-2W BN 2-Light Vanity Light Fixture, Metal Shade, Modern Bathroom Lighting Brushed Nickel Finish by Justin Live

I selected this to replace the original 2 light vanity in one of the bathrooms.Things I like:1.) The aesthetic.2.) The brushed nickel finish.3.) Mostly easy to mount.Things I didn't like:1.) In one of the photos you will see what appears to be a rust spot.2.) In another photo you see my finger pointing at the ring that is used to keep the light housing secure on the frame. This ring is a pain to screw on and off. You twist and it gets stuck and it's no matter how straight you twist. You might get a turn or two then that's when it gets stuck. I had to fiddle around with it to get it to turn in the direction I needed it to turn.3.) The mounting bracket. It has two screws on it that is used to hold the vanity light to the bracket. Once you have the bracket up you then line up the holes in the light housing and slide the light on. At this point all that's left is the two screw ons which you turn until both are tight enough that the light is secure. You will probably find that you either have a situation where the tiny knobs are screwed on but there is still slack. At that point you have to take the bracket off and then adjust the two bolts on the inside to where you can get the the little knobs tighten on the front to keep the light secure.I don't like this design.Also the lights are more like spotlights as far as the beams it puts out.What should have been no more than let's say a 15-20 minute job ended up being closer to 40-45 minute job.In spite of my frustration with this light, it's nice looking.I hope this helps.