Review on Performance CPU Heatpipes Anti Oxidation Protective Computer Components by Stanisaw Krlak ᠌

In general, the cooler is excellent, not high, it will fit into most cases, BUT! In no case do not use your own theomopaste ! Do not listen to the previous commentators! I assembled the whole thing on my own thermal paste, started it, 4 GHz and the temperature smoothly reached 70+ degrees without reaching the end of the test (linpak), the test was stopped. Vkoryachil the second turntable for blowing - the result fell a couple of degrees, there is little sense, the exhaust is not hot, like the radiator at the edges (there is no access to the tubes, they are covered with a decorative cover). I took thermal grease from a friend GD 900, set the cooler to 100%, removed the block cover, all case fans are also 100%, on native paste 65 degrees, on zhd900-58 ! 7 degrees straight down! And the exhaust from the cooler became noticeably hotter, as did the radiator itself. I used it for a month, when I removed the cooler to replace it, it noticeably dried up in addition to everything that would have happened in a year, for example, the question is a mystery, keep that in mind. At first I thought that the heat dissipation power did not correspond to the declared one, since my fx, even with a slight overclocking at low voltage, approached 65 degrees, like on the old cooler master on 2 tubes and on GOST kpt8, now these are 65-67 at 4+GHz. In the photo with 1 and 2 turntables