Review on Genuine Honda 35750 SHJ 306 Switch Assembly by Tony Elliott

Works with Odyssey 2005 EXL This item worked great. They came without instructions. I found this online and it programmed both the door lock and the sliding doors! Beware of other versions as they are fakes that do not program sliding doors. A NOTICE. It is important to respect the time limits between phases. Make sure the doors, hood and tailgate are closed.1. Switch on the ignition (II).2. Within 1-4 seconds, press the lock or unlock button on the transmitter while pointing the transmitter at the keyless receiver built into the power window master switch.3. Turn off the ignition within 1-4 seconds.4. Switch on the ignition within 1-4 seconds (II).5. Within 1-4 seconds, press the lock or unlock button on the transmitter while pointing the transmitter at the keyless receiver built into the power window master switch.6. Turn off the ignition within 1-4 seconds.7. Switch on the ignition (II) within 1-4 seconds.8. Within 1 to 4 seconds, press the lock or unlock button on the transmitter while pointing the transmitter at the keyless receiver built into the power window master switch.9. Turn off the ignition within 1-4 seconds.10. Switch on the ignition (II) within 4 seconds.11. Within 1-4 seconds, press the lock or unlock button on the transmitter while pointing the transmitter at the keyless receiver built into the power window master switch.12. Make sure you hear the door lock actuators sound for 1-4 seconds, then press the transmitter lock or unlock button again, otherwise the code will not be saved.13. Within 10 seconds, aim at the transmitters (up to two others) whose codes you want to store in the keyless receiver and press the transmitter lock or unlock buttons.14. Make sure you hear the sound of the door lock actuators after storing each transmitter code.15. Turn off the ignition and remove the key. Make sure the transmitters are working properly. A NOTICE. After entering the programming mode, the remote control button must be pressed a second time. If the button is not pressed or the ignition key is turned off, the programming of all remote controls will be cancelled.