but if you find out it works. There is a picture of the wiring diagram for the small receiver box (small black box with 4 wires coming out of it), the center spade connector for the (-) wire, but you also need to get a ground wire to the battery from that same spade connector. I just connected a jumper wire from the center spade connector to where the negative battery wire connects. where is it? So if you have a large box, the mounting bracket is on the bottom and the 3 spade lugs are on the top. Then the top center of the large clamps is the negative (-) battery post, the bottom (center) is the battery positive (+) post and the red wire from the receiver box. The other two large terminals go to your motor. When you press the button, the external large terminals are turned on. hope that helps.
4WD ORCISH Recovery Traction Boards Tracks Tire Ladder For Sand Snow Mud - Set Of 2 (2Nd Gen Bag + Mounting Pins, Black)
39 Review
ORCISH 12V 13000-lb Load Capacity Electric Truck Winch Kit 🚚 with Synthetic Rope - Waterproof Off Road Winch for Jeep, Truck, SUV
35 Review
Yokohama Ice Guard IG50 215/50 R17 99Q winter
36 Review
Nokian Tires Nordman RS2 SUV 225/60 R18 104R winter
32 Review