Review on 🔥 MIG Welder Flux Core Welding Machine - 110V 220V 120A - Wire Feed Welder, MIG ARC MMA Lift TIG - 3 In 1 Multifunction Digital Welder with IGBT Inverter Technology - No Gas Required by Russell Wong

bad at first.1. The side door covering the MiG wire doesn't fit properly, so the latch doesn't keep it closed, the door is crooked and stuck.2. The MIG torch comes with a 0.8mm tip but they supplied a 1mm wire. A 1mm tip is included but the cup on the MIG torch is oddly placed so I had to tug on the torch protective cover and use a wrench to remove it and then get to the tip. Then I had to tap the cup with a brass hammer and adjust it properly.3. Feels very cheap and not packaged well, looks like the welder was put in the wrong box.4. The manual is terrible with no instructions for use or any real information about the machine. Now it is ok. The welder works great on both Arc and Mig (after I adjusted the bowl and tightened the tip on the torch). I connected it to a 20 amp 110 PSU and I have to turn it off or else I'll miss my work unless I'm working on something very thick, but it seems to me that it's enough for learning and practicing what I use it for wanted to. I'm not 100% sure what the duty cycle is as it's not listed in any manual or on the machine, but I took it as 20% and it works fine so no overheating issues.