Review on 🔌 Blink HQ 150 EV Charging Station by Jeffrey Sanders

Easy installation. Tried many different brands. We have two Blink stations at my family's hotel in Phoenix, Arizona, GoClarendon.com, the units were installed about three years ago. Get used to it every day. Survived the harsh conditions of the Arizona road. Used on various vehicles. So I knew the quality was excellent. Blink has everything we were looking for; 18" long cable, delay timer, easy wiring. Installation took about an hour. The device comes with a cord tender. This is a direct connection block. From your switch, simply connect one power line to the port labeled L1 and the other line to the port labeled L2. Then the ground wire to the terminal marked with the ground symbol. For the wire from the 30 amp switch I used red number 10 THHN (stranded). For the ground wire, I used THHN #12 green wire. I used eyelet terminals to crimp the ends of the wire. I bought them at a big hardware store. It made for a super clean and quick install. I used a non-metallic gasket to get out of the junction box. To unity. I used 3/4" with sealed connectors. The bore on the unit is 1". I used a 3/4 x 1" grommet to make it easier to connect. It works great. The Fusion now charges in about 2 hours on weekends when there are lots of errands going on. We can fully charge between rides. Leave the Fusion in electric mode for as long as possible our mileage is typically in the 85mpg range the cord is nice and long we can charge it on the go or in the garage quality and looks great i recommend this unit to everyone especially the first time installer as the installation is so easy is easy.The price is the best here at Revain.Super fast shipping