Review on 📺 Optimized Full Motion TV Wall Mount with 32 inch Long Extension for 42 to 80 inch TVs by Eddie Pollard

The AEON-45200 Universal TV Console Mount has exceeded my expectations; and as a mechanical engineer, I set high standards for acceptance. worth your money. Extends further out of the wall than most other wall mounts, but less than advertised. Measured from the wall to the back of the TV where the wall mount is attached, this distance is 3 inches when myTV is pushed all the way to the wall and 30 inches when the TV is all the way away from the wall and the TV is standing upright. not inclined. So this wall mount actually rotates 27 inches from back to wall to completely move away from the wall. This 27" size is listed in the owner's manual. This wall mount is perfect for my 60" TV. Moves forward, backward, left and right very, very easily. By horizontally adjusting the plate that attaches to the wall, You can mount the TV on wall studs that are not centered horizontally where you want the TV to be centered on the wall. The extension attaches to the wall plate with 3 screws at the top and bottom. You can remove these 6 screws and extend the extension assembly horizontally 2". in the wall plate up to 6" left or right of center. Swivel adjustment allows you to easily adjust the horizontal installation by simply rotating the TV clockwise or counterclockwise after it is fixed to the wall mount. The stepless tilt according to up to +15 degrees at the front can be easily achieved with the hand lever supplied.I have my television tilted +8 degrees and it stays where it is, even after numerous adjustments of the TV inwards and outwards, left and right of the wall. The integrated cable management system features six 7" long, 1-3/4" high plastic channels on the extensions, one on each arm, to keep all cables secure and routed out of the way and out of sight. I have 7 cables in a guide and it keeps them secure. I installed a 60" LG TV model 60LF6100 on this mount and when the wall mount is fully extended out of the wall the TV can tilt about 80 degrees either way from center. This allows you to sit practically anywhere in the room and turn the TV so that you are looking almost directly at the screen. The mount and my TV look great whether pushed back or extended. A lot of equipment has been provided to accommodate different types of TVs, leaving a lot of equipment after assembly. Good assembly instructions. Before you attach the wall mount to the wall studs, however, figure out how to attach the mount to the back of the TV so you don't block access to cable connections and keep all parts of the TV adapter box out of sight behind. TV, not above or below. It can be a little tricky, but this wall mount has so many adjustment options that it should work with almost any brand of TV if you take the time and figure it out first. Then determine the height of the wall plate based on the position of the TV adapter assembly on the TV to position the TV at the correct height. The installation of this TV wall mount is done by two people, especially fixing the TV to the wall mount. I also purchased the AEON-90200 soundbar mount and attached the Vizio model SB3821-C6 soundbar to the top of the TV. It can also be easily installed on the bottom of the TV. I did it myself and it didn't take long because the AEON-45200 TV mount was designed to mount the AEON-90200 soundbar mount without removing the TV, TV adapter or a wall mount. This soundbar mount makes it easy to mount a 3" x 3" x 38" soundbar flush with the front of your TV and center left to right. Different hardware options are available for different situations. AEON shopping .