Review on BING3D Printing Filament 1 75Mm PLA F by Dave Brummet

Package came with delivery within one day., standard brown carton. The vacuum bag was sealed well and the filament has another plastic seal to keep the filament from fraying, a nice touch. Manufacturer's recommended print speeds are printed on the pretty side of the logo and on the front sticker. I will update the print quality after 20 hours of printing. did. Obviously, PLA-F is a blend of PLA ABS. The bank massacre was a learning process. Layer adhesion was poor. After temporary turrets and a few boats, I figured ABS would address his nasty problems. I had to increase the layer temperature to 65°C and this fixed the layer adhesion problem. The next step was to increase the temperature of the nozzle to help the layers adhere better, but the boats broke from the sheer pressure. Then I lowered the fan speed to 50%... PERFECT. So, for those who want to try this PLA-F, here are my settings: nozzle 230-240°, bed 65-70°, fan speed 50-60%, print speed 50mm.