It's definitely better than the original, but it's not plug n play. You will need to cut the supply hose and gas hose to fit. Use sharp knives. That's easy. The positive line fits perfectly into the positive pole on the machine. Before you begin trimming, make sure you have fully inserted the gun cover and seated the bushing. The 2 pin connector is useless, cut the wires next to the connector to give you some length. Then find a 4-pin connector with 2 small blue wires and a blue and red large wire. It's on the green plaque at the bottom of the car. Blue and red should be underlaid with black and match the original pistol. Cut it to length with a pistol. Connect the wires, blue and red to black, from the new gun, whichever one goes where. Then tie everything together so it doesn't move. Before closing, remember to connect 4 pins again, check the wire feed, and then quickly weld.
309LFC-O X .035 X 1LB Spool Gasless Stainless Steel Flux Core Welding Wire by Blue Demon
12 Review
Inverter welding machine CET CET MMA 200A, MMA
23 Review
Hakko 599B 02 Wire Type Soldering Cleaner
11 Review
π₯ Tig Pen Rod Holder and Welding Finger Feeder by Dog River Tools - Maximize Your Welding Efficiency with our Feeder Pencil
12 Review