Review on 🔧 Skywalker SKY32815 - Heavy Duty 12-Inch Wall Mount Bracket (1 Pair) - SKY-32815 by Jose Wititsuwannakul

You will need a drill, vise or vise to bend the mounting leg "tabs" that abut the wall, a 10mm socket wrench, a 11 mm open-end wrench, or a deep socket. The wall screws are rubbish and other materials are good (zinc plated mild steel) but the mounting tabs have the wrong bend angle and the U-bolts don't match the hole spacing. The gap is too great and the mounting tabs need to be bent more to lay flat against the wall. All this can be corrected with a slight bend and more laborious (laborious) tightening of the nuts. Wall screws are best fitted with a 10mm socket wrench as the slots are too small for a flat head screwdriver. Once installed the brace is good but it should have been simpler and required fewer tools (I think they chose the hardware due to the low price).