Review on 🌊 32 Ounce Kit of Clear Casting and Coating Epoxy Resin by Carrie Spencer

I have found epoxy to be easy to use and give good results. I made a few mistakes initially, but quickly learned to get the best results. I will share: I overheated an application with a heat gun. Just skip it quickly to remove bubbles and don't overheat it. After applying and removing the bubbles, it is best to leave it alone. Just watch it the next day. Don't worry about it. I pour it into another cup after mixing and pour slowly. This will help remove bubbles and also ensure your project doesn't "get stuck" with epoxy (unmixed). Mix slowly and stir for at least 4 minutes. I've also noticed that when mixed properly it seems to be more runny than when I started mixing. Hope that helps. I've attached a picture of the emblem I cut out of the yellow heart with a jigsaw. I then inserted it into the canary wood with a router and filled the voids with this epoxy. I mixed Art and Glow's black mica powder with epoxy to get the color I wanted. I found that adding the powder early in the mix gave me a more even color. This is the top of the wooden box with the recipients' names rolled up in front of it. :-)