Review on 🚗 Arsvita Car Audio Bluetooth Cassette Receiver: Upgrade Your Car Stereo with Bluetooth 5.0 and Aux Adapter" by Chris Moody

Arsvit ordered Us1AKca008 they sent me a product with the item: Us1AKca004. I don't know if they differ - there is no mention of Bluetooth 5.0 anywhere on the box, packaging or instructions. Anyway, my new unit synced up easily enough, but when it was inserted into the tape recorder, it played for a short random time and then ejected. Others have reported similar issues with all known similar designs from different manufacturers. One of the reviews shows removing the gear outline in the picture (step). Use a small cross section. Removed 6 screws. Carefully pry off the sheath - the needle nose inserted closed into the working side of the cassette and slowly opened makes this easier than prying off with a sharp blade. All components remain in the lower half. Raise the gears AFTER taking the photo for reference. Save these parts. just in case. Take a picture of the battery part number so you can order one when the battery runs out of charge. * My player didn't have much room when the cassette wanted to be inserted because the wire came out at the end of the cassette. I used a hot hanger to lengthen the hole to allow the wire to exit the cartridge at an angle that doesn't prevent it from lying flat in the player. Put everything back together except for the gears you removed. Mine doesn't pop out on its own anymore. This device is the simplest, but by no means the best sounding solution. The overall quality lacks power, so the sound is honest, not HIFI. The volume is low - you'll have to turn the volume up - so watch out when you get back to the radio. I hope they improve the product. Check out the computer Apple put in the watch: 7j