Review on πΉοΈ Thermaltake Versa H17 Black Micro ATX Mini Tower Gaming Computer Case 2.0 Edition CA-1J1-00S1NN-A0 with Pre-Installed 120mm Rear Fan - Ultimate Gaming Case! by Adam Kotowski α
The right product for me, there were no problems.
The PSU shroud and the holes for attaching it are the biggest letdown. It is not stated anywhere that it cannot be removed. The power supply was installed by me, although not for the first time. I freely admit that the power supply (CHIEFTEC APS-550CB) and the case are my copies. With a typical case fan mounted on the back wall, the "top-flow" cooler (Deepcool Gamma Archer Pro) could not be installed. There is no such issue with the "tower" (Arctic Freezer 33 CO). Installation of a 140 mm fan (Arctic F14 PWM PST) on the top wall presented challenges because the fan's 27 mm thickness rest against the motherboard. Cut off between 2 and 2.5 mm where it meets the motherboard, and the issue is resolved. No door, front wall. Installation of 5.25 devices (such as DVD/CD drives, reobas, etc.) is not possible. The case is often substantial, quiet, and well-ventilated. The purchase has thrilled me.
- Cable organization (there is a ton of room for wires behind the right wall). Ties and Velcro recessed behind the right wall. Standoffs and several mounting screws are included. holes for mounting both new and vintage micro ATX motherboards. convenient gadget fastening for 3.5 and 2.5. Included is a quiet fan. includes speaker (tweeter). Exceptional craftsmanship, rolled edges. Magnetized dust filter mounted on the top wall. On the power supply's bottom wall is a dust filter. On the legs of the body are rubber stickers. reputable audio jacks. steel, which is thick. PCI-E expansion slot covers that can be used again and again.
- There is no way to remove the power supply cover. The power supply's mounting holes are offset. On the back wall, near the PSU mounting holes, a thin coat of paint. Installing a "Top-flow" cooler and a case fan opposite each other on the back wall may be challenging. The front does not have a dust filter.
