Review on 🖨️ Enhance Math Printing Efficiency with Independent Maths Printer Filament Package by William Turner

This is the hardest pla I've ever worked with. Each print is likely a hit out of four. Even if you print something well, trying to print the same thing again will fail. If you need to print something that takes more than 8 hours, unless you're desperate, don't use this. Even in individual roles, the quality of the sky is not constant. Some areas are fine, other areas can be very fragile. He may have problems with the feeder breaking. It has poor adhesion, especially to the plate, requiring you to print hotter and slower than you would expect from a similar plate. It is also the only cause of problems with the heating element. Spots resulting in smudges on the printout or clogging in the printhead, leading to further problems and requiring high maintenance. Other times it can dry out completely in the printhead, possibly due to a dry spot on the platen in the feeder causing the feed to stop? It's weird when that happens. But it looks like it's still in print, so you won't know until it's too late. I wouldn't say things like that if it was just once. As said, it may work for little things, you can actually look at it and expect a few glitches. If it really works, it can look very pretty. But I end up with more filament waste in my trash than is used in the final product. Just avoid the hassle.