Review on 🔩 9mm Angled Bolt Head Adapter Ball Base with 1" B Size Ball by RAM Mounts - RAM-B-272U by Kevin Gunnmann

In my opinion this is the best way to mount your phone on a sport bike with a RAM mount. I've used a RAM plug stem mount before and it works well enough, but this one is better! Here's a nifty little comparison chart: This mount: $11.50 (current Revain price) Fully secure RAM phone mount base Mounts to top triple tree, clamps, or other locations on handlebars if available (should be 9mm or smaller be a screw). be at least 6 mm thick). Due to the mounting options, your phone can be easily set aside so you can still see your sensors. Center steerer The mount starts to rotate slightly after a few hours of use (experiences may vary, this has happened to me, I have a 21mm inner steerer) The cellphone inevitably ends up near the center of the handlebars, probably blocking your sensors or some other part of it . General Conclusions: This mount is cheaper, more versatile and stronger! I highly recommend it. I have a Honda CBR600F4i with Gilles Tooling Clips. Since these clamps don't have an exposed turnbuckle, I installed it over the fork's turnbuckle. This is a 40mm M8 socket head cap screw. After installing with two washers, one on each side, I replaced the 40mm bolt with a 50mm bolt. A few threads stick out on the other side because that washer mount adds 7mm, but I'd prefer to grab than not enough threads on the top of the fork. I would definitely suggest buying a longer screw, as I did when you installed this one.