Review on 🏌️ Golf Cart Steering Wheel Adapter Hub for Club Car DS, Club Car Precedent, EZGO, and Yamaha Golf Carts - LEAPGO (Non-Universal Adapter, Refer to Variations) by Doug Layman

Handlebars and adapters purchased. Heard all sorts of problems with removing the stock steering wheel. It took 5 minutes to remove after I removed the scorecard holder. I think because the previous owner garaged the car and didn't handle it, and because it was a dry weather (Arizona) location, it probably didn't have rust or dirt from snow, rain, or dust. Lots of videos and posts on the process and how to remove a sticky steering wheel. In general, it is slightly smaller than the standard steering wheel. It took about 15-30 minutes to remove the old one and install the new one. Revine delivered this morning, ordered yesterday. Use a rubber mallet to help. As mentioned in one post, when the steering wheel is in the 12 o'clock position (straight up), the front wheels are slightly to the right of center; a little. I read this article and found that my stock steering wheel doesn't work either. When the wheels are straight, the steering wheel is definitely at about 11:45, so not too bad. If I really cared I could adjust the posts so it was perfectly straight, but that's fine. One more thing, do not overtighten the 6 bolts holding the handlebar to the adapter or they will loosen. I think these hex bolts are aluminum (they don't stick to my magnetic bolt and nut which I use when I need to keep track of assembly parts). 6 are tightened, so everything is fine. Many Thanks