Review on 🔧 Russell 639630 Speed Bleeder for Domestic Vehicles by Ken Arellano

According to their website the same part works in the front and rear calipers. I learned the hard way that they don't. The rear ones were perfect. OEM bolt removed, Russell bolt installed, brakes bled. Went forward and did the passenger side and thought I was fine when I saw clear liquid coming out of the hose. Dressed up, put the bike back and started working on the driver's side. Clear liquid spilled out on the driver's side and I was happy. Tightened, wheel put on and car lowered. Noticed a puddle of brake fluid under the passenger. I slipped down there and thought maybe I forgot to tighten it. So I turned it around a little more, thinking maybe the thread sealant was preventing it from fully seating. Jump in the truck to bleed the brakes to confirm and they will fall to the ground. I get out of the car and see a puddle of liquid under both front wheels. So yes, the front breathers are 1.4 inches and the rear ones are 1.25 inches. Proper Russell part numbers: Front 639560 (size M10 x 1.0 x 1.4) Rear 639630 (size M10 x 1.0 x 1.25) They do not have after sales service. -Mail, and I was also on hold on the phone. The illustrations show the difference in length between the front and rear air outlets.