High-Quality Automotive Fuse Box with 10 ATC/ATO Blade Fuses | 100 Amp | Integrated LED Indicator 🚗 and Protective Cover | Suitable for 10-30V DC and 12V Applications | Ideal for Car, Truck, and Marine Use Review

I am using this 10 pin OLS LED fuse box on my Jeep Wrangler JK to solve my dilemma of blown fuses when driving off road. The clear plastic cover now allows me to see which fuse has blown and I can easily replace it without having to locate, check and pull all the cockpit accessory fuses and engine compartment fuses. All of the auxiliary fuses are now in the center of my engine bay and are properly labeled. it's worth every penny.

Works great. I hooked up my firewall, hooked up a 10-gauge hot leg to the rack, and started powering my relay circuits (a cool little thing that lets you shunt a lot of power without taxing your switch, for sure youtube this automatic relay) for light strips, Hella horns and stereo. All the electrical parts were available from Revain, spade connectors, relays, wires, shrink wrap and fuses so I was able to make my own harness.

Can't speak to waterproofing yet because I haven't tested it and hope I never will. I hooked it up to an 80A ANL fuse box and a 150W amp. My clearance wasn't that good and I accidentally plugged my amp into the wrong power connector and immediately as I plugged in my last power cord the local LEDs told me I made a mistake because a fuse was missing, which meant the same thing. something like a blown fuse. Talk about easy troubleshooting. I use similar technology in automation days so it's…

I use it as an extra fuse box under the hood of my '62 Ford Falcon. 12V is set. This has worked great and really saved me lately. I got caught in a big snow storm and lost power near a bridge in New York, not a good situation. I opened the hood and saw an indicator that comes on when one of the fuses blows. I changed the fuse and after 5 minutes I was on my way. Highly recommended. I see a lot of other reviewers don't like this box, obviously it puts out some juice which they say can interfere…

Does what it's supposed to. Out of interest I installed a fuse and shorted it. the LED lights up. Makes diagnosis much easier. When I pulled the fuse it still looked fine, but the test came back bad. The tester may not be available locally and fuse replacement is expensive. It has 4 mounting holes for #10 screws. I also found that you can run a 1/4-20 tap in them so you can install from the back. While I wouldn't call it waterproof, the lid fits snug enough that I would call it weatherproof. My

I bought this for a homemade solar generator. Was looking for a cheap alternative to the Blue Seas version, it fits perfectly, less than half the price. It's so easy to install, all I had to do was mark the side of the contractor box and drill two small mounting holes and then screw them in place. I am currently using only 8 out of 10 available connections and it works fine. Designed for docking cargo and camping in tents, as well as in the event of a power failure in the network. It doesn't…