🛢️ TAP Magic 10016E EP-XTRAOZ ONE Cutting Fluid - 16 oz. Spout Top (Environmentally Friendly) Review

Updated Rating: Added a few stars because the product itself is good. Protects my bits when drilling metal. Original Review: Not the product I ordered. The bottle I received has a sealant-like non-resealable tip. I bought this specifically because of the flip top and even the question part said it had to be a flip top. I don't like false advertising at all. I will not buy from this seller again.

The product comes with a cheap lid which needs to be cut off and closed instead of the spout top which is specifically advertised and even has a separate close up picture. I actually ordered this one because it indicated the top of the spout. I didn't want to lose the little cap like I used to, and I also wanted the bottle to be accidentally dropped so the oil wouldn't spill. Well, don't mess with returning and getting another because who knows what I'll get.

If you use this in manual mode (like I usually do) you just need to wet the tool. Like other light cutting fluids, TM works by two mechanisms: evaporative cooling of the tool (thereby removing heat) and lubricating, which reduces friction between the tool and the workpiece (thereby preventing heat build-up in the first place). Tap Magic does this VERY well on many materials that have a reputation for being difficult, such as: B. Architectural aluminum, copper, titanium. I bought a 1 liter metal

I wish I had tried this a few years ago. I use 3-in-1, there is nothing to compare. It makes cutting, drilling and tapping a lot easier and I need so little which is great. The shavings don't seem to clog the faucets and drill bits as quickly. It will hold up to lathe work and won't flake either. I use a needle applicator to apply it to everything I sharpen and can do 2-3 passes before I have to reapply it holds up so well. Chips tend to fall off, not as much as with dry cutting or 3-in-1. And…

I read other reviews that said it came with a black flip cap like my other magic faucets I have at ordered Revain. . Some reviews said it comes with a non-retractable spout with no lid but a hole in the top. Later when mine came. I couldn't believe Revane would obey orders like that. It's clear there should be a red snap cap, but due to the way it's packaged, that red cap is lost because the pointed spout makes a hole in the pouch it's packaged in. This is unacceptable! The product works great…

Pays off. I think so and here's why. All my life I have drilled metal, mostly steel. I wear out tons of drill bits over time and am just an amateur. On the current project, drilling a small set of bit sizes over and over again over the course of a year, I still get good results with the selected bit sizes that I use frequently. The 1/8" pilot diameter comes to mind when I use it for anything to get started. Yes, still on the same bit. noted the increased life of the drill. I liked the results…