14 Inch Aluminum Lazy Susan Turntable Bearing Swivel Plate Rotating Mechanism Hardware Kit Base Only Review

This was purchased to use under a large jigsaw puzzle platform that has drawers built into into. It works well for this purpose right put of the box because there are silicone feet attahced to both the top and bottom of the rings of the lazy susan. I had thought to screw it to the puzzle platform, but the feet cover a few of the screw holes and don’t seem to be removable without applying some force and probably damaging them. Oh well,it works as is, for my purpose anyway. Turns nicely, very…

Bought this to replace the original, plastic, rusted bearings, cracked, ring that came with my patio table lazy susan, which is a 21" glass round. It works beautifully. We have coffee on the deck most mornings, the coffee pot sitting on one side of the "susan" stays stable, does NOT tip like many lazy susans do. That's a BIG plus! We have also taken it inside to use on the dining room table at card club. Works great to make a pile of cards set on one edge, easily reachable on all sides of the…

Well packed, arrived on time with good communication before, during and after the sale.The only complaint is this unit is noisy. It will rotate well for a partial turn, then act like it’s grinding or binding up, then go away only to repeat the grinding again. I couldn’t find a specific place it bound up because it seemed to move. I added some oil and worked it a while until it improved but still, QC could be better.Note: after installing it on the wood round, it is quieter.Update: the seller…

This thing is strong as an ox. I mounted it under a heavy chair and it operates perfectly. The best part about it is that on each of the rings there are four REMOVABLE tiny bolts in pre-threaded holes so you do NOT have to drill it to mount it. You can either put screws through the holes, or you can attache it with bolts of the same thread. This thing could not be designed better or operate better. EXCELLENT!

First the products ( I purchased two) arrived with absolutely no instructions. Is the set screw for purposes of lubrication? The lazy susan I'm attempting to assemble is a 15 inch serving platform attached to a twelve inch pedestal. Both the platform and pedestal have been milled to 3/4 inch thickness and are perfectly flat. I figured out that the vinyl inserts had to be removed, after which I used #6 one inch screws to attach both the pedestal and platform. No matter what I do when I rotate…

I guess I expected that I would need to attach lazy Susan ring to our round food tray, but I quickly learned that it does not attached, but instead it is a ring that the food board sits on. Perfect!

It's OK however: The unit is very nicely made, no sharp edges, etc. The main problem is it's very hard to turn. Hopefully it will loosen up a bit. We put a few drops of oil in the bearing raceway to see if that helped - no. Saw a metric allen set screw on the side; tried to loosen it in case that was the key. Nope - could't get it loose, very tight. Also the feet allow it to slide around on a bare table. They need to be of a soft material which will "stick" to a smooth surface. Solution

I use it to make a swiveling TV stand. Then I can turn the TV to point to where I happen to sit. It works great.It has several holes that I can use to screw it to the bottom of the wooden TV stand. It also has several round hard plastic pieces, where I can drill corresponding holes in the bottom of the wooden TV stand as a temporary anchoring points before I screw it to wooden TV stand permanently. It also has several footers to space the Lazy Susan away form the table surface. I don't remember

I have a 65" TV mounted on a board which sits on this which then sits on a standard 6' x 24" table. It's very solid and turns the TV very smoothly. Works nicely for heavy loads but I would not recommend putting a TV on this if you have children or pets around.

I bought this Lazy Susan for our extra large round tray (Kingcraft 26 x 26). I was not sure if worked, and it did!It is very sturdy and smooth for its purpose.

Does exactly what it should with excellence! Smooth rotation. Holds the weight of my 38 inch tempered glass lazy Susan on my dinning table and aaaall the food served on it every meal every daySturdy no installation just out if the box and onto the table!

This items was purchased to replace a plastic base for the glass lazy susan on an outdoor table. The plastic crumbled from years of setting in the sun. This is the perfect replacement and should last forever.

I used this lazy susan to mount my shop filtration system so it can be oriented to the area that I'm working. I made the mount so that the filtration system is removable ( so it can be removed and used on a job site) I did have to modify by removing the nylon feet and drill the holes through and countersink, then add washers for clearance.It operates very smoothly. Just remember when putting the screws in that they go in straight, otherwise it can put the lazy susan in a bind.

This is a free standing unit. Works very nicely but I had hoped to attach it to two surfaces top and bottom. As it turns out I like the idea of being able to move it wherever I want it. I use it for a turn table when finishing furniture.

Proper size for my 24 inch glass lazy susan. Ball bearings a bit noisy once weight if glass was applied but does not hamper ability to turn. Would have preferred stickier plastic mounts but so far have not experienced sliding of base upon turning lazy susan. Would buy again.

This product is well designed and works well for our use case. We have an 18-inch, 2-inch thick butcher block on it -- not light but not nearly as heavy as this item purports to hold. The mechanism of this item rolls smoothly under our butcher block. Its low profile was als

This product filled exactly what i was looking for. The only reason it is getting 4 stars is because:1. It didn't come with any mounting hardware. So if you plan on screwing this down to whatever you are using it with, prepare to need screws.2. I found that for it to turn smoother there needed to be some kind of spacer between the lasy susan wheel and the board. This was no problem for me because I had some spare spacer around but if you're looking for a product that you can take out of the box

All the lazy Susie's I found were cheap this one allowed me to build my own it is amazing smooth and so strong we'll definitely be buying again

Works well. Some instructions for installing it would be helpful though. But we eventually figured it out with trial and error.

Better than what I returned but still a disappointment. Very well packaged and when opened I saw this (see pics) all over the hardware. Lots of scratches and marks on metal. It did not turn as well as I expected but I added machine oil and it seemed to help. Rubber tab feet are not sticky and it has a tendency to slide on table surface. Again, very high price for the quality of the item.