20-Pack Of GWHOLE IDC 314-BOX Electrical Wire Connectors For Efficient Robotic Lawn Mowers And Irrigation Systems Review

These connectors work and are less pricey than the 3M brand. I purchased them for use with my Automower perimeter wire loop.

These arrived with the goo leaked out all over the inside of the bag. And a couple were already pushed in, rendering them useless. But I needed them to fix cuts in my Landroid wire so I used them, and they worked like a charm! I was impressed by the fact that once I clamped them closed with pliers, more goo came out of the holes, sealing them perfectly. I am a happy customer and would buy these again. I assume the clear "goo" is a Vaseline-like petrolatum grease that'll keep the holes and wires

Design was used by many repairmen for various transmission lines like telephone pedestals one sees along roads. A telephone repairman gave me a handful over 20 yrs ago and i was sold on the simplicity. You do not need wire strippers. One pair of lineman pliers will do it. They are great in emergencies and also for just normal wire connections. No need to strip wire, once done silicon squeezes out and seals. Depends on location of connections but if one has the room they are great, last better…

Many of the pieces come apart in the bag leaving the silicone all over the place. So far they have worked with connections but very messy.

I think these are a bit overpriced, but once I learned the best way to use them, they are much better then my old way of splicing wire. And, although it is difficult, they can be reopened and reused when needed.

Used it to connect wires from my landroid. Works like a charm. Put two wires into the connector. Make sure to squeeze the heck out of it to make sure you have a tight connection. A good amount of goo should come out.

There is an extensive irrigation system on my property, in excess of 36 sprinkler valves. I have used wire nuts and other brands of blade connectors. These have the best price point of any of the other blade style I have purchased. They are very easy to use with irrigation wire 18-22 gauge. I do not have any experience with larger wire. Also, be aware that there are only 3 ports if you are in the habit of gang wiring the common. The completed connection will withstand a very strong pull, unlike

Was worried that these would be inferior to the 3M version. So far, they worked identically when replacing electric brake wiring on a travel trailer. Easy to use for up to a three wire splice.

The three way crimp has grease packed in them and squeeze over the wires connecting them very easily. I like that you can see that the wires are all the way in so that when you crimp you don't waste one by a wire not being all the way in.

So, I got these for landscape lighting. It worked well with both the smaller wiring on the light fixtures, as well as the main wiring. With the main wiring I trimmed the circumference just a bit to fit easily into the connector. It's been about a year since I set up the wiring with thee connectors, and -0- fails. Recently I added a few lights, and bought some more. Great product.

These are the best connectors to use for broken wires for my Husqvarna Automower. They are a little tough to compress so I use a pair of pliers.

Bought to rewire my boat trailer. After I finished, none of the lights worked. I had to cut all of these connectors out and use a different splice. Once all of these were replaced, all lights worked. I would suggest a different connector and save yourself some time and money.

If you're going to use these for landscape lights and you use 14G wire then you're going to have to shave the wire insulation down to get these to work. Once I did that it worked fine.

Description says will work for 14 awg and gave some examples of outdoor applications. Apparently the insulation on the 14 awg wire used for landscape lighting (purchased from Home Depot) is too thick. Will be returning. Product came in a clear bag. Appeared to be in good shape.

I got these to have handy for replacement. They seem a proper replacement for the oem ones I got. Good fit for purpose. Thanks for attention!

Only 13 in pack. I didn't order a used/open pack. I ordered a new one. Opened package received.I'm going to message seller and see what happens, lower Stars initially for sending me less quantity than ordered.Otherwise these seem the same quality as 3M or similar quality as 3M version.The plastic is translucent enough to see wires reach the end to ensure you have enough wire before you crimp.Update: they corrected the issue. Sent out a complete set. I did have to return first package.

Installation: very easy if wires are the same gauge; slightly harder if different. No need to strip wires before splicing. Works as advertised

I needed a few of these for my robot lawnmower I thought I would save myself some money over the 3M. Arrived in the mail with all the grease leaked out of them all over the bag. Even the plastic and metal feels inferior. No way would I recommend using these especially in a wet/harsh environment unless you want frustrating issues in the future. Picture next to 3M on the right. Will be returning. Spend the extra and buy quality.

Finish is slightly lower than the ones with a company logo on them, but these work great. I needed to connect 14 and 18/20 gauge wires together on an aftermarket fuel gauge replacement, and these worked very well. The price was so good compared to the ones with the logo that I didn't even get upset when I had to cut two off and throw them out because I'd connected the wrong wires together.