4-seater camping tent Mircamping 1036 Review

Two-layer camping tent MirCamping 1036 is designed for 4 campers. When folded, the tent is compact, only 59 x 17 x 17 cm. A special bag with handles is provided for storage. The tent is light, its weight is 4.2 kg. Included with the tent is: a set of metal pegs and storm guys, fiberglass arcs with a diameter of 8.5 for the bedroom and 7.9 mm for the vestibule. Tent dimensions: length 400 cm width 250 cm Height 155 cm. Sleeping capsule length: 220 cm. Width 250 cm. Vestibule length: 180 cm. width 250 cm. Awning material: Polytaffeta 190T 68D PU 3000mm (waterproof, with polyurethane impregnation) The seams are double and glued with a special tape to prevent water from leaking during rain. Inner tent material: breathable 190T polyester, no condensation on the walls, which guarantees a comfortable rest in any weather. The tent has a hemisphere geometry in the area of ​​the sleeping area and one arc on the vestibule in the form of a semi-barrel. In general, the design is thoughtful and comfortable, a large bed and a vestibule for storing things make it possible to use it for a long rest. The vestibule has 2 entrances, one from the end, the second from the side. In the hot season, this provides good ventilation, lighting and freedom of movement. Both entrances are equipped with doors, they can be kept closed or unzipped and fixed at the top (side). There are no mosquito nets on the vestibule doors. But the sleeping capsule at the entrance also has a mosquito net and is duplicated with a dense non-translucent fabric. At your request, you can either close the door, or leave only the grid, or completely open everything and fix it with strings from below. The tent has 2 windows, which are located opposite each other. They have a built-in mosquito net to protect against insects and thick curtains that can be closed if necessary. All zippers on doors and windows have protective strips and are additionally fixed with textile fasteners (velcro) to prevent water from leaking during rain with wind. The floor is reinforced polyethylene, a very durable and moisture-resistant material that does not allow moisture to penetrate inside. For small things inside there are 2 pockets and a hook for a flashlight under the ceiling. The assembly of this tent is simple and intuitive. The capsule is attached to the frame with plastic hooks. The awning is fixed to the frame with ties. The arc of the vestibule is threaded inside. You can see the assembly process and a detailed review of the tent by clicking on the video review.