4X3 Reducing U444LF Disconnect Clip Review

*** For Copper, PEX, CPVC, HDPE, PE-RT Pipe ***. Made in USA. INSTALLS IN SECONDS: Quick Push-Fit connection insures a clean leak free connection with no special tools, no soldering, no clamping or crimping, no unions or glue – EASY Just push to create a water tight seal. COPPER, PEX, CPVC: TigerBite plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination. INSTALLATION TIPS: (1) Gently cut tubing squarely while maintaining tubing roundness. (2) Remove abrasions & deformations from tubing exterior that may inhibit tight O-ring seal. (3) If tubing’s already stiff and holds roundness discard nylon stiffener (i.e copper, and PEX) – To remove stiffener safely, release grip ring contact with disconnect clip, while pulling stiffener with pliers. (4) For easier install - Apply stiffener to flexible tubing types before inserting into coupling. (5) Mark 1” insertion depth on tubing to indicate when tubing seats properly beyond O-ring. (6) Push tubing beyond O-Ring for water tight seal - Observing mark ends up near coupling body. (7) Disconnecting – While pressing disconnect clip towards coupling body to release internal grip ring contact, rotate and pull. CERTIFIED: TIgerBite fittings are certified to 200 PSI and 200 degrees Fahrenheit (93 degrees Celsius). Certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution and is the only brand to provide a lifetime warranty.