💡 10PCS 12V RGB Solderless LED Light Strip Tape 90 Degree Corner Connectors for 10mm Wide Flexible 5050 RGB LED Strip Lights with L Shape Connector by iCreating Review

This product doesn't work. Firstly there is no liability hence zero stars for this although I didn't expect them. Second, the colors are different from rgb, they are rbg, so the color changes according to the curve. YOU ARE TOO SMALL for the third. They are about 5% smaller than they should be.

I used this to clean corners for my TV backlight. Serves the purpose well. Clamps are tight. If you're having an issue where one of your lightbars isn't working properly, make sure the bar isn't upside down and the light sensors are wrong. All in all very positive and my TV looks great.

I bought these to install LED strips on my windows but I found them very difficult to use. You need to get the position of the pins just right for them to work, and if they slip a little you'll have to start over. They are also very difficult to open. I'm sure with practice I would have learned to use them better, but it was too difficult for me.

Ideal for applying strips at 90 degree angles to prevent fringing of strips and disrupting colors through connections. However, it is quite difficult to install and does not come with glue. at least not me. Overall not bad but for the price I would have expected more. Only if you need a clean install, otherwise you'd better solder the wires to connect the strips.

Half Bag (5) does not work. I think the pins are not rigid / connect well. When I press on the back of the small swinging door (the door is locked) it connects and my lightbulbs light up, then I release and either there is no light or my lightbulbs turn red and that's it. they don't change color. as they suspect. I got them to work for what I need but half (5) is rubbish. I would not recommend it.

Not satisfied with these L-shaped connectors. I finished my project but god it made it harder. Half of them didn't work. or they worked and one of the colors didn't work. I noticed that there is a lot of greenery. I changed them and everything around them. It was too much. I had a set of 16 foot long LED strips that I wanted to attach to a mirror. Should have taken me 30-40 minutes. Took me over 2 hours and the light is still not perfect, it's finicky. I don't know if all L-shaped connectors…

Well I'm almost ready to run it in the sun. VERY unstable, was a nightmare to get connections to work. Some of the forks arrived misassembled with bent corners because they weren't properly seated in the plastic clamps. Good luck getting all four pins touching all four connectors at the same time. And after looking at this product page, I realized that what I received is not even what is shown in about half of the photos - there are no metal tabs on the top cover of the snap part to hold the to

When I started cutting the LED strip and placing these corner connectors, everything seemed pretty easy. I put the connector on the cut LED strip and closed the connector. However, I never managed to get all the colors to work. I got a sample that was sometimes missing different colors or all colors. It has never been possible for all colors to work consistently. I figured maybe it was a bad connection, so I cut the LED strip (luckily I had enough leftovers) and got a new connector. Still had…