Header banner
Revain logoHome Page
๐Ÿ”ง nutone 8663rp motor assembly - 97017705, 1550 rpm; 1.2a, 115v logo

๐Ÿ”ง Nutone 8663RP Motor Assembly - 97017705, 1550 RPM; 1.2A, 115V Review

7

ยท

Very good

Revainrating 4.5 out of 5ย ย 
Ratingย 
4.6
๐Ÿš— Electric Motors, ๐Ÿ’ก Electrical

View on AmazonView on ะฏM

Media

(4)
img 1 attached to ๐Ÿ”ง Nutone 8663RP Motor Assembly - 97017705, 1550 RPM; 1.2A, 115V
img 2 attached to ๐Ÿ”ง Nutone 8663RP Motor Assembly - 97017705, 1550 RPM; 1.2A, 115V
img 3 attached to ๐Ÿ”ง Nutone 8663RP Motor Assembly - 97017705, 1550 RPM; 1.2A, 115V
img 4 attached to ๐Ÿ”ง Nutone 8663RP Motor Assembly - 97017705, 1550 RPM; 1.2A, 115V

Description of ๐Ÿ”ง Nutone 8663RP Motor Assembly - 97017705, 1550 RPM; 1.2A, 115V

Shaft 1/4" x 1"; Rotation = CCW; 3.3" Diameter Motor. Sheet metal = 8 15/16" x 8 15/16"; Wheel = 5.75" x 2". 2 Mounting Studs Opposite Shaft End. Motor Case Length 1 15/16". 2-Prong 115 Volt plug.

Reviews

Global ratings 7
  • 5
    4
  • 4
    3
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Very easy installation

The perfect replacement part as it promises. I would give 5 stars if the engine was made a little quieter! However, it's a quick and almost painless part replacement that avoids replacing the entire fan and enjoy the fun that can be fun! I used tape around the metal edges to reduce possible metal-to-metal vibration. This combined with the rubber washer where the light bolts really knocked down the vibration noise. If you found this review helpful, please click the button below. I did notโ€ฆ

Pros
  • Price
Cons
  • Frequency

I bought this model to replace one that failed after 15 years. My only dilemma was whether it would replace my 8663RM. The supplier listed the 8663RM as the one it would fit and after checking the Nutone website which had no information on the 8663RM I decided to order it. (I assumed the "M" was metal, which is my fairing, and the "P" was the polymer they make now; the fairing is not part of the fan motor.). My electrician came and installed it for me a few days ago - said it was perfectโ€ฆ

Pros
  • Handy item
Cons
  • Obsolete model

There were a few fans that were getting old and freezing so I ordered a few. The first was very tight for the fan power connector and didn't go all the way as the metal pushed the connector up. I finally figured out the problem and found that the slot that allows this to happen was misaligned by about 5mm. Then I took out my dremel, trimmed the metal slot to widen it to allow the connector to fit all the way in without pushing it back, and heureka it went in, works great and is less noisy thanโ€ฆ

Pros
  • A few competitors
Cons
  • skinny

Revainrating 5 out of 5

Nutone Engine (8663RP) OEM replacement fan assembly.

Fully replaceable fan assembly. If your fan assembly has this part number, it is a replacement connector. No special skills or tools are required. EDIT: I read a few other reviews so thought I should add some info. You may have to climb a ladder and stretch overhead. It would be a good idea to turn off the device. I needed pliers and a Phillips #2 screwdriver. I also used a vacuum to clean the case. If you notice the old block coming out, inserting the new block shouldn't be a problem. The oldโ€ฆ

Pros
  • Good
Cons
  • Low maintenance

Revainrating 4 out of 5

Perfect replacement for a 14 year old motor

This was a simple replacement for a 14 year old bathroom exhaust fan. All tabs and screws fit perfectly. I could see that this has a major improvement over the original: the fan is more securely attached to the motor shaft, preventing it from slipping around the shaft. This is an issue I had with both the original and another identical fan about 8 years ago. The fan (a shorted plastic cage) was simply pressed into a smoothly polished shaft on the original. Over time, it lost its footing andโ€ฆ

Pros
  • Good product for the price
Cons
  • Nothing included

The fan works very well. We have a bathroom fan that I installed in 1987. I would replace it entirely but I couldn't find one as good as the one we have. This is the second engine replacement ever. When I first opened the box it looked like the old one. When I tried to install it I found that the hole for the outlet was about 1/4 inch and one of the outlets was not fully in the hole. I tried fitting the new fan into the old bracket but it was 1/8" too deep and the fan was rubbing. I thenโ€ฆ

Pros
  • Dope ๐Ÿ”ฅ
Cons
  • Expensive

Revainrating 4 out of 5

NOISY! The metal frame doesn't fit, but does the job!

We bought an old house whose bathroom was renovated in the 1980's. The old fan didn't work. It made noise but didn't work. We pulled out the old breather thing and tried to figure out that the plastic vanes had melted where they made contact with the engine. We went to our local big shop but found we had to drill a new hole and do drywall work etc. So I was looking for a replacement NuTone motor and fan for the 8814, 8663 or 8673 and found this in my search results. It arrived within a week. Iโ€ฆ

Pros
  • Everything is fine!
Cons
  • Expensive