🔌 ACDelco GM OE 15-81727 HVAC Blower Control Module Review

Works perfectly (still) but is not an original part from ACDelco (the original part is strangely not ACDelco either). I hope this one lasts as long as the original (and hopefully longer). Installed on a 2010 Impala.

I knew it wasn't ACDELCO when I bought it but some might think it's because that it is advertised as such. It costs like an ACDELCO part, but it doesn't, bottom line, it fits and works, that's the main thing.

This worked just as well as the original and failed two weeks ago. The solder joints on the motor output pins are broken. Only this time I soldered the connector pins myself. Now the module is working properly. Poor production control of the soldering process.

I think this item should be advertised as OEM for GM as it is an ACDelco product. One in my 2006 Impala broke down so I replaced it with this one. My first impression is that this one seems to be of better quality than the OEM. Perfectly assembled, the holes match. Wiring harness connected, no problem. Now my fan works even better than before the module failed. I'm wondering if I should proactively replace the fan because if for some reason the fan has too much resistance it could cause my…

I bought this after my fan motor had a bearing problem. This in turn resulted in an excessively high current which disabled the fan motor and control module before the fuse blew. If your fan is always on, this is what you need. I had to save a few self tapping screws to attach the control module. I used two 10" x 3/4" stainless steel screws. The control module has been drilled with both holes required for its proper installation. The location of this unit made installation more difficult than I

Honey Bunny's 2006 Chevy Impala AC Heater/Fan Will Not Turn Off Even After The Key Is Removed. To keep the battery from dying, I removed the fuse from the machine to cut power to the fan. Then I went to Youtube and found this is exactly the part I need. The original part was held in place by a single 5.5mm screw and two permanent plastic "rivets". I knocked out the plastic rivets and pulled a spare screw from my stash I've accumulated from my junkyard days. The part worked as expected and the…

I installed this on a 2005 manual Impala and it works as it should. It was the exact model number that came from the factory. I have emailed several sellers including this one. They weren't sure either but told me I could try and just send it back. safe and that the information in the description was misleading. It worked great. and it works at all manual speeds. Installation and removal is not easy, the device is installed very close to the fire wall and you really have to lie upside down in…