🔧 Versatile Acrylic Clay Roller with Backing Board & Rubber Clay Tools: Premium Ultra-Light DIY Tool for Hand-Made Clay Creations Review

Is it so small that I would even drive it? Also, "protective packaging" seems annoying, so I'm just going. The scooter is the only thing I really needed and it's also quite small. big crap

The acrylic clay roller is not well protected by the plastic cover. There are scratches on the edges and after I removed the plastic from it there were tiny scratches on it. The plastic cover is already damaged, so the roller has tiny scratches. I don't have time for returns or exchanges.

The high quality clay I used with this little tool set immediately bonded and colored the acrylic sheet and roller. I have tried many ways to clean the platen and roller and now I only have a cloudy platen and roller. They still work when I coat them with cornstarch. The small size of the acrylic sheet is actually a good size for making kites by rolling the clay underneath. I have no idea what that flimsy little scraper is for. Mine came with a corner chipped off and the clay is stuck to it…

Acrylic plate has a crack, but I can still use it (only the side that doesn't have tiny chips from the crack). The scooter is basically what I wanted and it was perfect! Removing the protective layer from the acrylic panel was a bit painful. It was impossible to do it in one go - it was also very difficult to get the starting point on time, but it worked.

Loved the roller and only needed the scraper when the clay was stuck. There were also problems with the board. At first glance it seems small for any clay project. I thought I should remove the protective film that came with it to make it look like the photos (clear/clear) but I feel like I shouldn't have. My dough got stuck on a SMALL board, it could only be the dough. Overall a good rink but wasn't happy with the board or scraper. Instead, I taped parchment paper to the table to have more…

I know that Compounds and chemicals will melt with certain plastics. while using high quality audio. It will stay on the acrylic sheet for about 20-25 minutes while the other project is in the oven. When I tried to lift the items you could see the compaction on the sides and when you look at the bottom the sound was distorted and bubbling. So we threw the items away and tried to clear the small board. first with a scraper. vain. Then with a chlorox wipe. nothing yet. I sprinkled dawn on it and…