Autospecialty KOE3053 1-Click Brake Replacement Review

Brake Pads and Discs perfectly fit Camry 2013 SE. Brake pads came with all clips and necessary parts. Apply thread lock to the caliper bracket bolts. Apply anti-seize compound to the back of the brake pad and to the tabs of the brake pads at both ends. No wobbling, no creaking. Remember to follow the instructions for breaking discs and pads. The instructions can be found on the packaging of the brake pads. Excellent purchase! Time will tell how long they last.

The rotors are unfinished and will start to rust once fitted to the vehicle. One of the rotors was out of balance, causing vibrations that increased with speed. I was fed up with removing the rotors and replacing them with OEM Toyota wheels after less than 500 miles. I would give them 1 star but the brake pads were good, came with all the replacement clips needed and were well packaged. Overall I wouldn't recommend it unless it's your only option for the money. They'll probably be good for city

So I ordered this kit for my 2007 Camry LE. Came quickly and today. 7/1, I went to replace my front rotors and pads. I pulled out my old pads and rotor. Then I opened the box and found that the rotor in this kit is incorrect. The rotor that arrived looked like a rear rotor because the hat was large and not vented. I sent an email to fix this issue. Lets see what happens. When ordering this kit please make sure you check the parts to ensure you have received the correct parts. 'Cause if you…

They fit my Toyota Camry 07. I've read several reviews the rotors rub a little on the caliper bracket. Part of the rotor on either side of the front was rubbing against the caliper mount. The left one rubbed more than the right one. I don't know why this happened, I'm guessing some of the rotors weren't machined as perfectly as others where the sections were millimeters thicker than the others? I don't know but can't tell for sure from looking at it, it's just a guess as all the rotors I've…

Front installed Camry 11 years old. Generally good but for the internal position of the pad on either side the pad barely fits and again only when I hammer it in with a rubber mallet. The pad was supposed to "float" a little, and this was deployed. When comparing the fit of the bolsters to the old ones, the new bolsters were only about 0.008 inches larger on the two seating surfaces. I CAREFULLY sanded them down with a 3" abrasive pad on a grinder until they were .002" to .004" larger than the…

Rotors are excellent and already appear to have swirl marks as if pre-machined/ground to prevent squeaking. but the pads on my car are definitely screaming. You can't hear them in a car with the windows open, but you can easily hear them with the windows down. I tried re-lubricating the metal parts that were rubbing, but it definitely ended up being a pad issue. I had to go into the auto zone and change all the pads. So now I have no more money. I would send them back but the rotors are…