Bracket Pole Mount VESA75 100 Review

Sturdy and well built. The mount is larger than I need for a small monitor. It needs to hold things that are much larger. Attached are a few photos so you can see how large a rod can be. If the rod is less than 1-1/8" in diameter I would say it is too large and unable to to clamp them. 1-3/4" seems to be the maximum size you can fit.

Clips are strong and good quality + part of the stand clip is covered with plastic. It protects the armrests of my expensive office chair. Before installing, I loosened the bracket screw and rotated it 90 degrees. After installing it on the armrest of the chair and installing the mount vertically, I took measurements and made a HOTAS mount that slides over the plate. Velcro is also needed to attach to the hand, otherwise the frame will rotate forward when you press the HOTAS. One thing is…

I needed a dual monitor system to send video to a series of video projectors but didn't want to use the counter space. I bought handicap handrails and mounted them vertically above the processor with two of these monitors supporting each other. The whole setup works well in a small space. One thing you need to do is tighten the connecting screw that has its head inside the clamping area. You want it to be stronger than it is, and you won't be able to reach it once it's installed. For…

I bought these monitor mounts to mount monitors on several of my speaker stands and am very happy with them. The design is good and the mounts also allow the monitor to be rotated The mounting screws that tighten to the base use hex head screws - great for security but not so good if you want to quickly remove and disassemble the rig Here is my review: Pros: 1. Good design, well made 2 2 Sets of VESA holes (75mm and 100mm) 3. Rubber protectors to attach to the stand 4. The hex head screws on…

Well built, very durable. I have this to attach an Intel NUC (very small computer) to the tripod leg of my telescope (Celestron AVX mount). For that it works great. The Intel NUC includes a VESA mounting plate with screws that would normally screw onto the back of the monitor and then the Intel NUC can easily be quickly attached to the plate using 2 large screws that fit into the NUC housing, that fit into the slots on your VESA plate. To give my telescope the same quick mount capability, I…

Perfect fit for my small TV on top of a stand. The sound just wasn't right for me, so I came up with the idea of mounting it on a stand. This mount basically allows my soundbar to be positioned: face up, face down, left, right, high on a stand, low on a stand and can even be rotated so one side is horizontally higher than the other , if I want. do something. Unfortunately, there wasn't an easy way to mount the speaker bar on a stand. I thought about driving the screws directly into the plastic…

Needed to mount two 40" TV screens on lighting stands and/or trusses for my DJ setup to play music videos and karaoke to mount. Vesa knows 200 TVs, plus I needed to be able to mount and remove them without having to unscrew them every time. I bought 2 of these rack mounts, 2 75/100 quick release mounts, 2 VESA adapter plates and 2 sets of VESA screws. Place half of the quick disconnect on this pole mount that attaches to a light pole or truss. The other half is a quick connector on the adapter…

I am in the process of replacing an old analogue CCTV system with more modern digital cameras. When I installed my original system 20 years ago I was a bit more mobile and could crawl up and down the attic with no problem. Now I'm in my 70's and my dexterity is a thing of the past. So I need to reconsider how I do projects that require tall ladders. Thanks to new technologies, surveillance cameras have become cheaper and have better image quality. I replaced my old analog cameras with Wi-Fi…