Camco Stainless Steel Solid Brass Water Wye Valve - Easy Grip Handles, Simple Hose Connection, CSA Low Lead Certified (20123): High-Quality Water Control for Enhanced Convenience Review

I have used this product to control my RV's inlet water pressure. I use RV all the time so basically the product worked every day. It failed after 3 months and stopped letting water through. I didn't particularly like the gauge reading that didn't show actual PSI. It showed up just below LOW at basically every campsite I've stayed at. The day I started using it, there may have been something wrong with the product, and the situation gradually got worse. I am upgrading to a more expensive…

We used this in our garden to be able to connect the hose and gentlemen at the same time. This works great, allowing us to choose which side we want to work on without having to unhook the hose every time. We've used both sides at the same time, but usually the gentlemen come out very slowly or not like everyone else while we're using the hose, so it's best to only use one side at a time. We also used it to use Slide and Slide and Gentlemen at the same time. After both sides could increase the…

I bought this to disconnect the cold water inlet to my washtub and washing machine. The end of the spout on the faucet in the laundry tub is completely empty and I have to use it for various purposes from time to time. Connections are tight, no leaks. When you open the valve the water comes out the same way as if you opened a garden hose, so having a hose is almost mandatory to avoid splashing water everywhere, but I guess that's to be expected. Overall I would recommend!

Like other reviews, stupidly tight levers. If I use enough force to move the valves, the levers would snap surly. Since it is to be used as a drinking water connection, I first tried to defuse the situation with vegetable oil. It didn't work so I went with WD-40. I was finally able to loosen the valves and now they work freely and easily. I've cleaned it with soap and water and the valves still move smoothly and smoothly. Time will tell if they will keep moving without additional lubrication…

Nothing to say. It works. The valves turn easily and work as they should. I used this with my RV so multiple hoses are active at the same time. It was winter so they were freezing which is a shame. The metal will probably freeze more easily since it doesn't hold as much heat, but that's to be expected. However, note that in this case you will have to use a hair dryer or heat gun to remove it. Winters of high heat and low cold are easier and eventually crack. I'll update when they do.