Automotive amplifier SWAT M-1.500 Review

After half a year of work, it began to turn off periodically, changed to a new one under warranty, this one worked for a year and everything started the same.

Amplifier full go . but. Two weeks later, the bass began to disappear intermittently. Changed "irs". I put more expensive and high-quality, after 2 days and he covered himself. Don't take it under any circumstances.

Connected at home to a JBL Stage 1200, high-level signal from a home receiver, powered by a battery charger. Adjustments, unfortunately, only by ear. I tested a little, judging by the ammeter, the current did not rise more than 2A, without a signal it consumes up to 0.5A. But I didn’t load it much so that the neighbors wouldn’t come running. There are 2 fuses of 25A each, i. E. theoretically consumes up to 50A, the seller said that the power cable and 8Ga would be enough, but I think to put it…

I have to say this is my first amplifier for cars. But before that I worked with pop sound and in studios as a tech. personnel, therefore, in general, I am guided by the issue. The sub, due to weak filters, plays dirty at medium and high volumes, so you need a head with a subwoofer output with an internal filter or an additional external filter. There is a huge difference when you cut off 100% of the frequencies with a software cross (my home system) and when you cut off on the amplifier…

The output amp has 4 terminals (2- and 2+). I pumped 2 Mystery subs in the garage, 150W each. A separate bass control is very convenient when playing tracks of very different quality (bitrate). After a while, I sold it to young guys on one of the Internet sites. They were satisfied Its pros: Undoubtedly, the main advantage of this amp is the price / power ratio. Took less than 3 thousand. You can add: a convenient bass control, not large, not heavy. After 2 months of operation in winter at 50%…

It is necessary to modify a little, replace the ceramic capacitor between 5 and 6 legs with an electrolyte of 10 microfarads 50-63 V (plus 5 legs). I have already done a lot of these and so far no one has complained, this is the second year for such a stit.

Breakage for no reason is a sign of "made in rank". In general, while working, of course, I was pleased. But when I turned it off - I took it for repair - after the repair I worked for a week and the same thing began. Z. Y. - worked in the softest mode! To the limit never tried to shake it. Usually in the background of the radio at a low volume. Sometimes gave in, but not much. Rubbish is shorter. I do not recommend anyone to save and buy this Ge!

The build quality is of course embarrassing, the delivery from the box immediately caught my eye that the regulators are offset relative to the holes in the case. But for this price tag, with its parameters, it is foolish to expect a high level of quality. I do hope it lasts a long time. If it lasts, then the TOP, if not, well, anyway, for this money as a temporary solution, it’s quite good.

Bought in October, in the cool season, everything is cool, shakes all the money. In the spring, on long trips, I began to notice that the bass was disappearing, I sinned on the wire, I checked all the contacts, it doesn’t go into protection, everything is fine on short trips. It's summer, it's +30 in Hong Kong and after the car has stood under the sun I start it up - there is no bass, there is food, I turned on the air conditioner and after a while the bass appeared. In short, it heats up in…

Used in the home system 7.1 under the sub. Feeds ural molot 10. I'm waiting for the oscilloscope to raise the gain higher, otherwise the clip comes somehow early. The whole system is powered by a PSU with Ali at 86 A (twisted by 15V with a drawdown of up to 14.3V). The rest of the speakers are fed by an 8-channel VCL ural 820220 Well, where else is another VCL for 12k for 8 channels? (yeah audio 7.1 on auto components)

After a couple of months, in the summer in the heat, he began to warm himself and pass out. I put a fan in it - it saved some time. But he began to cut off again. I put two fans (for blowing in and for blowing out) and a radiator for a microcircuit, which cut off the entire amp from overheating. Did not help. On the street +10 - about the same time he works. Further in the mode "a little work - a lot of rest." The power there, judging by the filling, is 150-200 watts maximum. Too bad the…

For 4590r a great option, there is a remote control and Hi input. Quality build amplifier. The clamps are a little flimsy, but if you tighten it carefully, everything will be fine. I took to replace the failed built-in amplifier of a home subwoofer BBK 150 watts of power, I took 12 volts from a 200 watt switching power supply. The remote control is very convenient and of excellent quality, placed it near the TV set. After 5 hours of operation at medium volume, the amp did not heat up at all. It

Terrible service! Paid and ordered on October 11, 2022. 4 days observed the status "In progress". I decided to write to the TP, they assured me that everything was fine and the order would be delivered on time - October 20, the status still hung that the order was being processed. What's the bottom line? As a result, no one brought anything! They just apologized and said they would announce a new delivery date. Just bravo! They can't even keep their promises. It is not yet known when the money…

I’ve been using it since spring, paired with a 10" Hertz EBX 250R subwoofer, it pumps at half the gain without problems, not for the whole street, but it’s enough for me. Recently, standing in the heat in a traffic jam, I noticed that the bass began to go away every half a minute for 5-7 seconds and reappear. The monoblock is installed in the underground of the trunk, apparently therefore it began to heat up beyond measure. I solved the problem by turning the monoblock upside down (there are…

Krch story was a sub avatar sbr12 with a nominal value of 150 watts played from 4 channels of audio nova (bridge) after which it was planned to buy a more serious sub and for it I wanted a monoblock there was a big discount in dns and decided this miracle without thinking to buy it cost 1700. I connected it taking into account the fact that at 4 ohms, 300 watts should give, but this is most likely at 14.4 amperes (which is impossible with a regular battery and gene), in fact, he even moved the…

I fed them with 4 ohm ten jbl, with a face value of 300 watts. Despite its small size (because it is a D class), it suffices in abundance, does not heat up, eats little, the set of filters is standard. Naturally, you need to use it wisely, and I would not feed the speakers with insane powers. Naturally, it will handle a subwoofer much better than any AB in the same price range.

Pros below: Compact, fit into the dashboard, and since the amplifier works in D-mode, it does not heat up. I took a Morel Primo 804 subwoofer speaker, the amplifier power is enough. Has cons: Separately, the fastening ears are not unscrewed, the RCA connectors seem rather weak.