case fan be quiet! Pure Wings 2 140mm PWM, black Review

In the thermaltake supressor f31 case (a rather large case, although it is considered a midtower), the cable length when installing the front fans was enough right back to back. I don’t know if I was lucky or if the manufacturer intended it that way, but I think it would be better if an extension cord was included in the kit.

If the performance / noise ratio is in the first place, then this is the best case fan for the money. Got pros: One of the quietest and most productive low-speed fans in its price segment Got cons: The bearings are not perfectly quiet. The kit comes with silver metal screws, although the coolers are black. There are no anti-vibration pads to mount to the case.

For quite some time now, I have been on the lookout for traditional, matte-black 140mm coolers. In today's LGBT society, it's not easy to track down just black turntables. I bought it and have no regrets; at $800, it's fantastic and comes with a 3-year guarantee. Then I switched to the BL083; it's the same car except it goes 1600 rpm. In addition, 8 acres!

Silent, better than ever. There were branches from dipkul, a set of 1500 apiece, they made more noise, at the same temperature indicators.

Excellent quality and equipment. The turntables have been standing for several months, there is no noise. They are excellent in quality and in their work too. I recommend.

I have been using fans of this company for a long time, it costs 10 pieces in a case. The fans are quiet and reliable. Nothing sticks together, no buzzing and works great. I recommend to buy.

In the working (remote, web surfing) mode, it is silent, in games it can be heard, but my video card coolers are interrupted (Asus 3080ti)

Bought as a replacement for the Arctic cooler. It feels like it works a little louder than its predecessor, so it’s worth putting it on rubber mounts due to the power of the fan. Got pros: It was installed for blowing, as a result, it drives the air with such force that the outgoing flow is stronger than that of the blowing fan. Long enough cable for 4 pins. Good design, does not stand out in color among the components. Its cons: For the price, it could come with screws (maybe they didn’t put…

Reviewing my firsthand usage.I took two fans, both emit a squeak at startup, if you do a semi-passive mode of their operation, it's annoying

Good cooler. In the photo, this is the one on top (there is a cooler from the factory below) Its purchase is due to the fact that, as I thought, it is similar to the fan standing next to the factory, it turned out to be not quite the case, since the factory has 3 pin power supply. housing be quiet! Silent Base 600 Black

I put it on blowing air over the processor cooler in the nzxt h500i case. 140 is also enough to remove heat from the motherboard radiators. In general, the unpretentious characteristics of the turntable are compensated by good workmanship. Of course, it's a little expensive for such characteristics, but in this case we pay for the company and for its quality and reliability. Regarding reliability and quality, of course, it’s still too bold to talk about this product, since I’ve been using it…

Got pros: Good power. Quite silent. But for the price, I don't know. Got cons: Appearance. Everyone has their own tastes, but I did not like it. Not compatible with NZXT S340 Elite case.

Got pros: More beautiful in real life than in the picture. Really big and quiet. Its cons: The included screws are silver, not black. But it's already the taste and color .

4 years ago I assembled a computer, put 4 such turntables in it - 3 for blowing in, 1 for blowing out. I set the speed in the BIOS - while the percentage is cold, something about 900 rpm is spinning (less on my mother did not work), when the temperature rises, the speed grows to 70-80% of the maximum. I set it up on the basis of considerations so that the temperature in the case does not grow much - the difference in the end is a couple of degrees between the loaded and unloaded state. I…

I put it in place of the old screw on the radiator that died from time to macho roar V. I did not lose, a practical and quite worthy replacement for the screw from the kit. Not noisy. Happy as an elephant

Some pros: Quiet at almost maximum speed, taking into account the fact that the computer was in the audience where someone was constantly mumbling and so on. Cons below: The motor began to crackle after 3 years of almost continuous operation.

I put 3 pieces into the body for blowing, leaving only 1 for blowing out, reduced the speed to a minimum - they pull enough, the flow is very confident. The task of blowing in my case is simply not to interfere with the pressure inside the case to push the air out. After native turntables from Zalman, the system unit became so quiet that you have to listen to understand whether it works or not. To be fair, the power supply and cooler on the processor are also quiet, the computer is under the…

I bought 4 of these valves for installation in the Fractal Design Define R5 case (2 propellers were already there). So in total there are 6 valves in the case (3 for blowing in and 3 for blowing out). Connected to the motherboard ASUS ROG CROSSHAIR VII HERO via 4pin connectors, allowing you to control the fan speed through the BIOS. The wire is long enough to connect to the motherboard without any problems. The maximum fan speed is 1000 rpm and at this speed they are absolutely inaudible. I…

I bought a third blower from the front to the Fractal Design case, the rest are complete. Set to work in the range of 500-700 rpm. And while listening, I noticed that in silence we can distinguish a small rumbling sound that does not depend on the speed control mode (PWM - voltage), and it is this fan that makes it. Yes, the sound is heard only if you bring your ear close to the air intake. But I would like from be quiet! impeccability. So I'm taking off one star so they don't get arrogant.