🚗 Cllena Dual USB Charger with Voltmeter, Power Outlet, Toggle Switch - Ideal for Car, Boat, Marine, RV, Truck, Camper, GPS, Mobiles - Green Review

I threw the ashtray and cigarette lighter out of my 1997 Buick Riviera. I don't intend to smoke, but I like to charge my phone!

Definitely a decent setup! Looks almost like a factory install and works great. I installed this in the lower center compartment on a minivan dash. Two USB, ideal for phones. Exactly 5 volts at the output on the load, checked by an accurate analyzer. The cigarette lighter socket is great for Garmin. The voltmeter feels nice and the power button is convenient. I added a Bluetooth receiver on the back that connects to the factory stereo to give the minivan a slightly more modern touch.

The Cllena Dual USB Charger has worked great so far for the off-grid battery system I've built. The setup options for swapping hubs are really good and I'm currently using 2 USB ports and 1 12V port. This works with a 12V or 24V DC system. The wiring was a bit confusing and I would really only recommend this to those who have at least basic experience with electricity. The price of $30 is a bit high at the time of purchase, but the overall comfort made it worth it. 4/5

I installed this in my 99 Mercury Grand Marquis. Using the supplied plate as a template, I drilled through the dash and managed to fit everything. I suppose if you're willing to do what I did you'll be able to figure out all the details. Everything works as advertised. It's not ideal as I chose to mount them on a slightly curved surface, but it still provides a clean install that looks great. I'm glad the 20 year old car has everything you need to keep everyone's phone charged on the go.

Got this to provide my 12v dc multicooker output for my RV which will be used during the Drive draws 8 amps continuously for hours. This is a significant sustained load, so I installed it with the correct gauge primary wire for my application, used the crimp connectors provided, and then connected the circuit directly to the power supply. It does a good and safe job. A nice plus is a voltmeter and USB ports. I rotated my bezels 90 degrees and removed the flip cover from the USB ports so it now…

I just installed it yesterday and I'm very happy. I installed it in an RV and it's so handy. Allows battery voltage to be displayed and allows mobile phones, tablets and other devices to use the USB port for power supply. Has an LED light in the power button so you can tell if the panel is powered on. There are no wiring instructions, but the polarity for each block is clearly marked and the blade terminals are silver and gold. Supplied with insulated clamps (6) and fixing screws (4). You can…

How to wire this if you want the switch to turn off (and on) all elements on the board. Negative incoming from the fuse box (or battery) to the brass terminal on the switch, then to the negative terminals of each appliance. This is a blade to blade cascade. For the switch, the brass is negative and the other two are positive. The terminals of the device are marked with "+" and "-". Connect the center terminal of the switch to the positive terminals of the devices. The plus line from the fuse…