Computer case 1stPlayer Rainbow R3-A black Review

If desired, you can stick 4 120 propellers, I put 3. One stood behind the front panel, it can be removed easily, you can fasten it with just two bolts. See photo!

For your money a great option. Got pros: Lightweight and roomy body. I did not find any records of how many ndd disks fit, as a result 2 and the ssd is not fixed, it is simply removed from the back wall. Nice design, easy to connect. Cons: Either stock up on nerves or buy immediately mounting the motherboard to the case, the standard ones in the kit cannot be screwed normally, I installed it from the old case.

For 2-2.5k it can be normal, but I don’t advise taking it, although it can be all foil in such a price tag. I decided to save on the case, so as not to save on hardware

Pros: Many RGB backlight modes, tempered glass, bottom power supply, large enough. Different cons: Poorly ventilated, just because of the glass, even with 5 turntables.

The picture is beautiful without words. According to the description, it is large, a cooler up to 17 cm high will fit. According to the HDD, supposedly 2 places under 3.5, 2 places under 2.5, 2 vents 120 and 2x140. In fact: in principle, it is also beautiful. That's all. My 15 cm CPU cooler came up close (17 aha). On hdd just 2 places, or put 2.5 or 3.5. My 3 disks didn’t stand up naturally (there is a place for 2 on top of the vents. It’s not clear where to sculpt another 2x140. They even set

In fact, the case pleased, packed soundly. There were no problems with the wiring, the connection of the front panel is clear and without a manual, there is a lot of space to hide the wires at the back, the glass is without cracks and chips, initially on both sides in a protective film. The only thing is, I also saw a couple of comments about the standard cooler, after turning on the PC, the backlight goes out and only glows with a red dim light below, but the cooler itself works quietly, maybe

In principle, a normal thermal gun for its little money, if you rarely use it, it will live for a long time. If every day is a lot, then for a year or two (provided that the arms are straight to eliminate breakdowns). Some pros: Cheap, puts out a lot of glue. There is an adjustment. Reliable power cord. The stand, in principle, normally allows you to put a thermal gun. Repairable. Workhorse. Cons below: I noticed three problems with this thermal gun. First, the nose leaks on almost everyone…

There wasn't much choice. The cost of the cases jumped up a lot, although it is not clear why, the rest of the kit seems to be normal. The case is thin, but good geometry does not allow it to become a tin can. When assembled, it looks better than in the picture. There is an RGB backlight controller for the front panel only. (there is 1 small LED strip and a controller). For this, the reset button is used, i. E. you will not have a reset on this case. (or you can make a reset, then there will be

Different pros: Design. Side cover made of tempered glass. Backlight with a bunch of modes. Has some cons: There is no adequate place to install ssd. Not enough space for cable management.

Has pros: Roomy, bright case with the possibility of installing water cooling and plenty of space to hide cables. Many options for changing the backlight on the front panel at the touch of a button. The correct calculation of the cooling system will allow even the hottest "heart" to work correctly. Top for 2666. Got cons: 1. The absence of a gap for ventilation between the case and glass, which is technically correct in order to prevent dust from entering the case. 2. There is no cover for the

With its pros: PSU from the bottom (although it's not convenient to connect a hard drive), of course, the backlight :) Some cons: The niche for laying wires between the right cover and the case is small. It was not critical for me - but if a lot of things are stuffed, cable management will be inconvenient.

Some pros: reasonable price for such a complete set, it is convenient to assemble, for this money 120 rgb cooler + wide rgb panel in front with a large selection of backlighting, tempered glass and this is a little more expensive than competitors with plastic! does not cut fingers, there is a channel for wires from the power supply unit at the back, this pleased Its cons: out of the box it was with a hole without a plug where the video card slot is, the video card was placed on the slot below,